SEGEL is an Indonesian brand specializing in sealing, bonding, and anchoring solutions for plumbing, construction, and general repair applications. Our products are engineered for professional performance while remaining easy to use.

Yes. SEGEL pipe sealants, chemical anchors, and adhesives can be used by both professionals and DIY users as long as the instructions are followed.

SEGEL products are available through our website, TikTok Shop, Shopee, and direct order via WhatsApp.

Yes. Depending on the model, SEGEL pipe sealants can withstand up to 25 Bar, and our chemical anchors are suitable for medium to heavy loads.

Yes. You can contact us via WhatsApp for product recommendations, installation guidance, or application troubleshooting.

• 5543: Medium viscosity, for small–medium pipes (¼”–2”), fast curing
• 5577: High viscosity paste, for large pipes (>¼”), higher pressure resistance
• While 5543 has maximum pressure strength up to 10 Bar, 5577 has strength up to 25 Bar

Yes. Both 5543 and 5577 eliminate the need for seal tape, providing stronger, cleaner, and more reliable sealing.

No. SEGEL pipe sealants allow tool-free installation. Hand tightening is sufficient for most applications.

Yes. Both 5543 and 5577 are suitable for water, gas, air, and mechanical systems.

Initial curing varies by material:

• Brass: 30–60 seconds
• Steel: 2–8 minutes
• Aluminum / Zinc: 15–35 minutes

Yes. Before full cure, SEGEL sealants allow repositioning to achieve perfect alignment.

Apply heat or hot water on the joint to soften the sealant. Then loosen manually or with a tool.

They are recommended for metal-to-metal or metal-to-plastic joints.
Fully plastic-to-plastic joints are not recommended.

Yes. The formulation is suitable for water systems when cured properly.

• SEGEL 5543: up to 10 Bar
• SEGEL 5577: up to 25 Bar

A chemical anchor is a two-component resin that bonds threaded rods or rebar into concrete, stone, or brick with extremely strong adhesion.

• F1311: Polyester-based, medium load, for hollow brick and decorative applications
• F1711: Epoxy acrylic, medium–heavy load, suitable for concrete and structural fixings

Yes. Both F1311 and F1711 are suitable for outdoor use. F1711 offers higher durability under extreme environments.

• F1311: Full cure in 25 minutes
• F1711: Full cure in 35 minutes
• Setting time depends on temperature.

Yes. Chemical anchors create no expansion pressure, making them safe near edges.

• Solid concrete
• Reinforced concrete
• Hollow brick (with sleeve)
• Natural stone
• Solid brick

Standard caulking guns can be used for both F1311 and F1711.

Yes. F1711 is suitable for rebar and structural reinforcement.

Plastic, rubber, leather, metal, ceramic, wood, glass, textiles, and more.

SEGEL 807 cures in 3–10 seconds, depending on material and humidity.

Yes. It forms a slightly flexible bond, making it ideal for shoe soles, leather goods, and rubber parts.

A small one-drop amount is enough. Too much glue slows curing.

Do NOT pull them apart.
Soak in warm, soapy water → gently separate → use acetone if needed.

Yes. It works well on porous and semi-porous materials.

Yes, for non-conductive areas only. Avoid electrical contacts and wiring.