• Medium-viscosity, thixotropic formulation
• Drip-free, clean application
• 100% leak-proof sealing
• Anti-corrosion and anti-rust protection
• No seal tape required
• Supports adjustment of fitting direction before full cure
• Reliable sealing for both metal–metal and metal–plastic threads
• Fast initial curing on brass and steel
• No pipe wrench needed — hand tightening is enough.
• Food Grade formulation, suitable for potable water systems.
• Up to 60% faster installation without tools.
• Reduced labor costs through shorter installation time.
• Gap-filling technology seals even misaligned threads.

1. Ensure all surfaces are dry, clean, and free from grease.
2. Apply the sealant evenly on the first 2–3 threads.
3. Assemble and tighten by hand.
4. Allow the joint to set according to material type.
5. Once cured, the joint becomes fully pressure-resistant.
6. For disassembly: apply heat or hot water to soften the cured sealant, then loosen by hand or with a tool.

SEGEL 5577 — High Viscosity Anaerobic Pipe Sealant

SEGEL 5577 is a high-viscosity, paste-grade anaerobic pipe sealant formulated for large-diameter threaded metal pipes. It fills wider gaps, provides superior sealing under high pressure, and protects against corrosion. Ideal for industrial environments, heavy-duty pipelines, and demanding applications.

Technical Specifications

Parameter	Value
Recommended Pipe Size	Starting from Pipe Diameter Size ¼” and above
Maximum Pressure	25 Bar
Viscosity	50,000 – 60,000 cPs
Gap Filling	up to 0.50 mm
Strength	Medium
Temperature Range	–10°C to +150°C
Colour	Yellow
Consistency	High viscosity paste
Packaging Options	50 ml, 250 ml (if you list them)

Typical Applications

• Industrial piping networks
• Large-diameter threaded pipes
• Water, gas, and chemical pipelines
• Factory mechanical systems
• High-pressure installations (up to 25 Bar)
• Loose or imperfect threaded joints
• Pipelines subject to vibration or thermal expansion

Curing Time

• High-viscosity, paste-like consistency
• Excellent gap filling for wide or imperfect threads
• 100% leak-proof performance
• High resistance to vibration, pressure, and solvents
• Allows alignment adjustments before full curing
• Does not drip or run
• Eliminates the need for seal tape or mechanical lock
• Suitable for industrial and large-scale piping
• Strong corrosion and chemical resistance
• No pipe wrench needed — hand tightening is enough.
• Food Grade formulation, suitable for potable water systems.
• Up to 60% faster installation without tools.
• Reduced labor costs through shorter installation time.
• Gap-filling technology seals even misaligned threads.

1. Ensure all surfaces are dry, clean, and free from grease.
2. Apply the sealant evenly on the first 2–3 threads.
3. Assemble and tighten by hand.
4. Allow the joint to set according to material type.
5. Once cured, the joint becomes fully pressure-resistant.
6. For disassembly: apply heat or hot water to soften the cured sealant, then loosen by hand or with a tool.